Precautions for pharmaceutical ultrafine pulverizer

1. The input amount of crushed material should not exceed 1/2 of the capacity of the crushing bowl.
2. The dry material is pulverized more finely. Not suitable for processing wet and oily items
3. When the machine is just turned on, if the blade is stuck by the crushed object, so that the motor cannot run normally, the power should be turned off immediately to prevent the motor from being damaged, and it can be restarted after cleaning.
4. It only takes 1 minute for general pharmaceutical crushing, and it takes longer for special needs. The crushing time should not be too long to prevent the fine powder from heating and sticking to the crushing bowl.
5. This pharmaceutical ultra-fine pulverizer cannot work continuously for a long time, and each time should not exceed 5 minutes. When the number of processing is large, it is necessary to rest in the middle to prevent the motor bearing from being damaged due to overheating.
6. For long-term use, the wear degree of carbon brushes and blades should be checked normally. Replace accessories as appropriate
7. To prevent the machine from falling to the ground and damage the machine, a relatively stable workbench should be placed
8. If it is found that the motor cannot work normally, check the circuit or check the fuse
9. When the upper cover of the pharmaceutical ultrafine pulverizer is opened, do not start the machine to work
10. The warranty period is one year and lifetime maintenance

https://www.bolymill.com/